Hikvision DS-3E1310HP-EI 8 Port Fast Ethernet Smart POE Switch

Description

Smart managed switches are developed by Hikvision, featuring in easy management and maintenance. You can easily deploy, monitor and expand your surveillance system anytime and anywhere with our software platforms. You can view the network topology, monitor the health of the network and receive device alarms in real time, which greatly reduces the cost of network operation and maintenance.

Hikvision DS-3E1310HP-EI Features:

• 8 × 100 Mbps PoE RJ45 ports, 2 × gigabit network RJ45 ports
• IEEE 802.3at/af/bt standard for PoE ports
• Network topology management, and alarm push
• 6 KV surge protection for PoE ports
• Up to 300 m long-range transmission
• AF/AT camera can reach up to 300 m in extend mode

Hikvision DS-3E1310HP-EI Specifications:

Network Parameters

• Ports: 8 × 10/100 Mbps PoE port,2 × Gigabit RJ45 port
• MAC Address Table: 16 K
• Switching Capacity: 9.2 Gbps
• Packet Forwarding Rate: 6.84 Mpps
• Internal Cache: 4 Mbits

PoE Power Supply

• PoE Standard: IEEE 802.3af,IEEE 802.3at,IEEE 802.3bt
• PoE Power Pin: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
• PoE Port: Hi-PoE: Ports 1 to 2,PoE: Ports 3 to 8
• Max. Port Power: 90 W
• PoE Power Budget: 110 W

Software Function

Long Range:

• Ports 1 to 8: up to 300 m
• Long range performance may vary depend on camera model or cable condition.

PoE Watchdog

• Ports 1 to 8: auto detect and restart the cameras that do not respond.
• VIP Port/

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

• Display the port rate.
• Display the port bandwidth utilisation rate.
• Display the PoE power usage.
• Display topology information.
• Display the alarm status.
• Restart ports and devices.
• Enable port long-rage mode.
• Remotely upgrade the device.

Port Isolation/

System Maintenance: Support device management via web.

• Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
• Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
• Support management via Hik-Central Pro.
• Support remote management via Hik-Partner Pro.
• Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
• Supports 802.1ab LLDP for peer device discovery.
• Support SNMP v1/v2c for third-party management platform access.
• Support port mirroring for fault locating.

Link Aggregation/

Storm Control

• Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.
• Supports port rate limiting based on broadcast, multicast, and unknown unicast packets

DHCP Snooping

DHCP Snooping can prevent unauthorised connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through Off by default.

QoS

• QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.
• Support port-based priority configuration.
• Support SP, WRR priority schedule mode.

Loop Prevention

• Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
• Support 802.1D STP.
• Suppport 802.1w RSTP.

VLAN

• VLAN is used for network scale planning and network health improvement.
• Support 802.1Q.
• Configurable VLAN ID from 1-4094.
• Support Trunk, Access port mode.
• Support Max. VLAN.

Port Rate-Limiting:

Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.

• IGMP Snooping/
• ACL/
• IPSG/

General

• Shell: Metal material, IP40
• Net Weight: 0.550 kg (1.21 lb)
• Gross Weight: 0.950 kg (2.09 lb)
• Dimensions (W × H × D): 217.6 mm × 27.8 mm × 103.35 mm (8.56″ × 1.09″ × 4.06″)
• Operating Temperature: 0°C to 40°C (0°F to 104°F)
• Storage Temperature: -40°C to 85°C (-40°F to 185°F)
• Operating Humidity: 5% to 95% (no condensation)
• Relative Humidity: 5% to 95% (no condensation)
• Power Supply: 54 VDC, 2.22 A

Installation Mode

Desk-Mounted;

Wall-Mounted;

• Max. Power Consumption: 120 W
• Power Consumption In Idle: 4 W
• Surge Protection: 6 KV

Approval

• EMC

  FCC (47 CFR Part 15, Subpart B);

  CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017);

  IC (ICES-003: Issue 6);

  RCM (ASNZS CISPR 32: 2015)

Safety

• UL (UL 60950-1);
• CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition);
• CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)

Chemistry

• CE-RoHS (201165EU);
• WEEE (201219EU);
• Reach (Regulation (EC) No.19072006)